Mako Sig Pro 2022 to Carbine (PDW) Conversion Kit with Folding Stock

Mako Sig Pro 2022 to Carbine (PDW) Conversion Kit with Folding Stock Review

Mako Sig Pro 2022 to Carbine (PDW) Conversion Kit with Folding Stock Feature

• Increases effectiveness of pistols in a concealable package, by providing the shooter with 4 points of contact
• Mounts to front and back of pistol frame, for a secure zero-holding attachment
• Perfect for discrete security operatives
• Allows use of original iron sights
• Folding stock with rubber buttpad; system folds up to a smaller package than a mini-Uzi

Convert pistols to compact PDW weapons. Increases effectiveness of pistols in a concealable package smaller than a Micro Uzi. Mounts to front and back of pistol frame. Includes charging handle, single-point sling, folding stock with rubber buttpad, and top, bottom, and side rails. Drop-in installation. Allows use of original iron sights. Designed for use with or without suppressor. Works with ported pistols. Rugged aluminum and steel construction. Perfect for discrete security operatives. Compatible with Sig Pro (2022). Disclaimer : If you own a host pistol and buy this product, your pistol will become a short-barreled rifle. You must first register your pistol with the ATFE using ATFE Form 1. See also KPOS17 for the Glock 17, 17L, 19, 22, 23, 24, 25, 31, 32, 34, 35 KPOS21 for Glock 20 and 21 KPOS226 for Sig 226

Tacstar Tactical Shotgun Conversion Kit-Remington 870

Tacstar Tactical Shotgun Conversion Kit-Remington 870 Review

Tacstar Tactical Shotgun Conversion Kit-Remington 870 Feature

• Converts Remington 870 hunting shotgun to tactical in minutes
• Includes TacStar Sidesaddle for storing up to 6 extra rounds
• Includes Tactical front and rear grips
• Tacsling developed especially for pistol gripped shotguns
• All necessary hardware and complete step by step conversion instructions included

Now all the accessories you need to convert your shotgun from Hunting to Tactical in one easy kit. Includes Front and Rear Tactical Grips, 6-Shot SideSaddle, Tactical Shotgun Sling, Barrel Magazine Clamp, and a Quick Detach Sling Swivel Set for the mounting sling. Complete step by step mounting instructions are provided. Each kit is especially designed for the appropriate Remington shotgun. Kit represents a 10% savings over individual purchases. Available for 12 Gauge only.

Zipp 188 Freehub Conversion Kit (2009+), Shimano/SRAM (Red)

Zipp 188 Freehub Conversion Kit (2009+), Shimano/SRAM (Red) Review

Zipp 188 Freehub Conversion Kit (2009+), Shimano/SRAM (Red) Feature

• Cassette Body Type: Shimano
  Hub Color: Red

Zipp Speed Weaponry Freehub Bodies and Conversion Kits.

Item Specifications
Fits	188 Zipp hubs (2009+), Shimano/SRAM

48V 1000W 26 Inch Front Wheel Electric Bicycle Motor Conversion Kit

48V 1000W 26 Inch Front Wheel Electric Bicycle Motor Conversion Kit Review

48V 1000W 26 Inch Front Wheel Electric Bicycle Motor Conversion Kit Feature

• Motor specifications: 48v / 1000w / 470rpm
• High motor efficiency: > 80%
• Motor diameter: 245mm
• Reinforced 32mm rim and 40mm tire
• Brake shuts off motor automatically, saves energy, improves safety!

We are introducing a Brand New 1000W 48V 26" Electric Bicycle Front Hub Conversion Kit which meets your requirement of converting your bike to an electric powered scooter/moped in much more reasonable price.
Approx. 48 KPH top speed
Provides you with a whole wheel with tire, not just the tire frame
Takes less than hour to install
We have FRONT wheel kit and REAR wheel kit in store
Feature:
1. The kit includes motorized wheel, motor controller, speed throttle, power break lever, wire harness
2. Quiet and reliable brushless gearless hub motor
3. Motor specifications: 48v / 1000w / 470rpm
4. High motor efficiency: > 80%
5. Motor diameter: 245mm
6. Reinforced 32mm rim and 40mm tire
7. Drive system has no moving chains or gears, no friction, more efficient, less chance to break!
8. Brake shuts off motor automatically, saves energy, improves safety!
9. Thumb throttle with 3 LEDs indicator lights
10. Battery charger for charging lead-acid battery
11. Durable 600D Oxford cloth carrying bag along with a zippered main compartment for battery
12.We have FRONT wheel kit and REAR wheel kit in store
Package content:
--Powerful 1000W 48V brushless hub motor
--26" front wheel (the whole wheel with tire!)
--Battery charger
--2 brake pullers
--Electric controller
--Thumb gear changer with battery power indicator
--Battery power indicator
--2ea. handlebar grips
--Rubber connecting harness (color will pick at random)
--Battery not included
Special:Comes with upgraded battery carrying bag and end bracket for FREE Battery recommendation:
1. Electrokinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 48v, nominal capacity 20Ah is compatible with the motor.
2. Li battery is highly recommended, among which LiMn2O4 battery will be of optimum performance.

Electric Bike Conversion Kit FRONT 26" Geared Motor & SLA Battery

Electric Bike Conversion Kit FRONT 26" Geared Motor & SLA Battery Review

Electric Bike Conversion Kit FRONT 26" Geared Motor & SLA Battery Feature

• The E-BikeKit Conversion Kit has everything you need "out of the box" to convert your conventional bike into a high-quality electric bike.
• Motor: Front Geared Hub Motor (6-bolt ISO disc brake compatible)
• Power: 36v (350-450w / 17.5MPH)
• Battery Charging Time: 4.5hrs
• Warranted: Motor = 1 Year / Everything Else = 6 Months

The complete system has everything you need "out of the box" to convert your conventional bike into a high-quality electric bike. Engineered to comply with USA Federal guidelines the E-BikeKitTM system is "Dealer Friendly" and requires no insurance or licensing in most states. If you are deciding whether to convert your existing bike or to buy a complete electric bike you should know that bikes converted with the E-BikeKitTM Complete Conversion System are comparable to complete electric bikes costing more than 00. The E-BikeKitTM Complete E-Bike Conversion Kit System is simply the best option in electric bicycle kit conversion.

Ball Locker Conversion Kit (EA)

Ball Locker Conversion Kit (EA) Review

Ball Locker Conversion Kit (EA) Feature

• Perfect companion for baseball Players
• Durable
• To improve your game with this Hot sale Item

Easily convert a standard ball locker into a cart to transport and store small items. Can easily be used as a laundry basket. Made of heavy duty breathable mesh fabric with a strong poly board on the bottom to keep items from falling out. Attaches w/hook and loop fasteners to the top rail of the cart. Will fit carts that are 45"L x 24"W x 38"H.

Truvativ American-To-Euro Bmx Adapter

Truvativ American-To-Euro Bmx Adapter Review

Truvativ American-To-Euro Bmx Adapter Feature

• Tightens via 3 steel bolts
• Use with 68mm wide bottom bracket

Converts American BMX shell to accept English threaded BB cups.

Dillon Precision RL 550B Machine Caliber Conversion Kit

Dillon Precision RL 550B Machine Caliber Conversion Kit Review

Dillon Precision RL 550B Machine Caliber Conversion Kit Feature

• Contains: Shellplate, powder funnel, and locator buttons
• Available in over 120 different calibers
• Fits the RL 550B Machine

Contains: Shellplate, powder funnel, and locator buttons. A conversion kit is needed for each caliber on the 550B. Conversion Kits can easily be installed in just a few minutes and change easily for fast caliber switches.

Mako Glock to Carbine (PDW) Conversion Kit with Folding Stock

Mako Glock to Carbine (PDW) Conversion Kit with Folding Stock Review

Mako Glock to Carbine (PDW) Conversion Kit with Folding Stock Feature

• Glock-to-Carbine PDW conversion kit designed to increase pistol effectiveness
• Adds charging handle, single-point sling, folding stock, and extra rails
• Rugged aluminum and steel construction; mounts on front and back of pistol frame
• Concealable package smaller than micro Uzi; drop-in installation
• Compatible with Glock 17, 17L, 19, 22, 23, 24, 25, 31, 32, 34, and 35 pistols

Convert pistols to compact PDW weapons with this Glock-to-Carbine PDW conversion kit from Mako. The PDW conversion kit increases the effectiveness of pistols--adding such features as a charging handle, single-point sling, folding stock with rubber butt pad, and top, bottom, and side rails--all in a concealable package that's smaller than a micro Uzi. Made of rugged aluminum and steel, the kit is easy to install. Just drop it onto the front and back of the pistol frame and you're set. The kit is also versatile, with a design that works with or without a suppressor while allowing for the use of original iron sights. Perfect for discrete security operatives, the PDW conversion kit is compatible with Glock 17, 17L, 19, 22, 23, 24, 25, 31, 32, 34, and 35 pistols.

Note: If you own a pistol and buy this product, your pistol will become a short-barreled rifle. You must first register your pistol with the ATFE using ATFE Form 1. Convert pistols to compact PDW weapons. Increases effectiveness of pistols in a concealable package smaller than a Micro Uzi. Mounts to front and back of pistol frame. Includes charging handle, single-point sling, folding stock with rubber buttpad, and top, bottom, and side rails. Drop-in installation. Allows use of original iron sights. Designed for use with or without suppressor. Works with ported pistols. Rugged aluminum and steel construction. Perfect for discrete security operatives. Compatible with Glock 17, 17L, 19, 22, 23, 24, 25, 31, 32, 34, 35 Disclaimer : If you own a host pistol and buy this product, your pistol will become a short-barreled rifle. You must first register your pistol with the ATFE using ATFE Form 1. See also KPOS21 for the Glock 20 and 21 KPOS226 for Sig 226 KPOS2022 for Sig Pro

Nite Ize LRB-07-PR1W 1-Watt LED Bulb Upgrade/Replacement for Most C/D-Battery Flashlights

Nite Ize LRB-07-PR1W 1-Watt LED Bulb Upgrade/Replacement for Most C/D-Battery Flashlights Review

Nite Ize LRB-07-PR1W 1-Watt LED Bulb Upgrade/Replacement for Most C/D-Battery Flashlights Feature

• Super-bright flood and focused spot
• 50,000 Hour LED life
• Reliable and efficient LED technology
• Easy to install

Quickly convert your halogen xenon C-cell or D-cell flashlight into a bright LED flashlight with the Nite-Ize LED Upgrade Kit! Simply remove your current bulb, replace with the LED upgrade bulb, and voila! You now have a flashlight capable of emitting a pure, white light. Making the switch to LED can help you save money on batteries and replacement bulbs!

Razor MX500 & MX650 Throttle (4-Wire) Conversion Kit

Razor MX500 & MX650 Throttle (4-Wire) Conversion Kit Review

The original replacement twist grip throttle with 4 wires (Red, White, Yellow, Orange) for the Razor MX500 (Version 1-9) and MX650 (Version 1-7) has been discontinued. In order to upgrade to a newer throttle, you must purchase this Throttle Conversion Kit. To find your bike's version number, see important note below. This Razor MX500/MX650 Electrical Conversion Kit contains: 1 - Control Module 1 - 6-wire throttle with a 6 pin plastic connector The Kit replaces the Razor Dirt Rocket MX500 & MX650 control module model # CT-312C1 (also known as HB3650TYD4-FS1) and 4-wire throttle with the MX500/MX650 control module (CT-312C1-3 /HB3650TYD-FS) & 6-wire/5 pin throttle. If upgrading a MX500 version 1-9 or the MX650 version 1-7, the module and throttle must be upgraded simultaneously in order to work. This kit will allow you to make the upgrade. **IMPORTANT NOTE: Razor Bike versions can be

24V 500W 26 Inch Rear Wheel Electric Bicycle Motor Conversion Kit

24V 500W 26 Inch Rear Wheel Electric Bicycle Motor Conversion Kit Review

24V 500W 26 Inch Rear Wheel Electric Bicycle Motor Conversion Kit Feature

• Motor specifications: 24V / 500W / 235RPM
• High motor efficiency: 75%
• Motor diameter: 245mm
• Thumb throttle with 3 LEDs indicator lights
• Brake shuts off motor automatically, saves energy, improves safety!

This Brand New 24V 500W 26" Electric Bicycle Rear Hub Conversion Kit exactly reaches you needs! By adding an electric motor wheel, a LED light and a throttle, you will find electric bike will let you enjoy the outdoors, and provide the fun you deserve.
Approx. 30 KPH top speed
Provides you with a whole wheel with tire, not just the tire frame
Takes less than an hour to install
26" whole wheel with 6 gears provide more speed options
Feature:
1. The kit includes motorized wheel, motor controller, thumb throttle, LED lights, power break lever, wire harness
2. Quiet and reliable brushless gearless hub motor
3. Motor specifications: 24V / 500W / 235RPM
4. High motor efficiency: 75%
5. Motor diameter: 245mm
6. Drive system has no moving chains or gears, no friction, more efficient, less chance to break!
7. Brake shuts off motor automatically, saves energy, improves safety!
8. Thumb throttle with 3 LEDs indicator lights
9. LED lights with power indicator on the panel and horn button
10. Durable 600D Oxford cloth carrying bag along with a zippered main compartment for battery
11.We have FRONT wheel kit and REAR wheel kit in store
Package Content:
--Powerful 24V 500W brushless hub motor
--26" rear wheel (the whole wheel with tire!)
--LED lights with battery power indicator
--Electric controller
--Thumb throttle
-- Horn button
--2ea. handlebar grips
--2 brake pullers
--Battery carrying bag
--Rubber connecting harness(color will pick at random)
--Battery not included
Special: Comes with end bracket for FREE
Battery Recommendation:
1. Electrokinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 24V, nominal capacity 20Ah is compatible with the motor.
2. Li battery is highly recommended, among which LiMn2O4 battery will be of optimum performance

Belly putt conversion kit

Belly putt conversion kit Review

Belly putt conversion kit Feature

• Designed for ease of installation, use, and adjustment
• Allows use of your personal putter as a belly putter, for practice, play or experimentation
• Practice, adjust, play and continue to adjust until you have found the perfect feel for you
• Includes Belly Putt, Cutting Tool, Allen Wrench, & Replacement Plug
• Works with all standard putters!

Belly Putt Club Conversion Kit... Stabilize Your Stroke, Make More Putts! The benefits of belly putting are undeniable and now, with the Belly Putt, you can easily and quickly convert your own putter into a belly putter. In the Standard Mode, it's adjustable, so as you practice and play, you determine the length that's just right for you. Or, by utilizing the unique taper sleeve and Tournament Mode, you will be legal for tournament play. You can, however, always return your putter to its original state. Belly Putt Club Conversion Kits feature: Converts a conventional putter into a belly putter Adjustable length, locks in place Removable in seconds with no damage to putter Easy installation - everything included Use in Standard Mode (adjustable) Practice or Play or Tournament Mode (fixed) w/USGA Rules Conforming Grip Kit includes: Belly Putt, Cutting Tool, Allen Wrench, Hole Plug, Instructions Installation Instructions: Standard Mode Drill hole into butt of conventional putter grip with hole tool provided. Insert threaded tip of hole tool into putter grip and screw in to cut hole (rubber cut-out can be removed from tool with needle nose pliers for future use). Insert Belly Putt to the desired depth. Tighten set screw with the allen wrench. Slide black plastic taper lock on Belly Putt shaft down and into top of putter grip as far as it will go to tighten up top of the shaft. Note: Belly Putt is adjustable, play and adjust as desired. If removal is desired, just loosen the set screw and slide the Belly Putt out. You can place the small plastic hole plug provided into the putter hole if desired. Tournament Mode After using in the Standard Mode to determine the best length for you, leave the Belly Putt installed and assure that the set screw is tightened. Remove both grips (cut off the original grip and the Belly Putt grip). Slide off the Belly Putt plastic taper lock. Slide the 9 inch taper sleeve (tapered end first) onto the Belly Putt shaft. Tamp down from the butt en

Lifetime 1044 Quick Adjust Conversion Kit -- Pole Not Included

Lifetime 1044 Quick Adjust Conversion Kit -- Pole Not Included Review

Lifetime 1044 Quick Adjust Conversion Kit -- Pole Not Included Feature

• Adjusts from 7.5-10 ft without tools
• Powder coated finish designed to resist rust
• Universal bracket fits most backboards

The 3-piece Quick Adjust® mounting bracket adjusts in seconds. It is designed for strength and durability and is ready to handle aggressive play from all age groups and skill levels. Backboard not included.

36V 800W 26 Inch Front Wheel Electric Bicycle Motor Conversion Kit

36V 800W 26 Inch Front Wheel Electric Bicycle Motor Conversion Kit Review

36V 800W 26 Inch Front Wheel Electric Bicycle Motor Conversion Kit Feature

• Motor specifications: 36V / 800W / 350RPM
• High motor efficiency: 75%
• Motor diameter: 245mm
• Thumb throttle with 3 LEDs indicator lights
• Brake shuts off motor automatically, saves energy, improves safety!

Here is an unbeatable product for you. Exactly an easy way to enjoy the benefits of an electric bike motor with an electric bicycle conversion kit rather than getting a new bike is to use. Here, we offer this 36V 800W 26" Electric Bicycle Front Hub Conversion Kit which meets your requirement. By adding an electric motor wheel and a throttle, you will find almost any standard bicycle can be transformed into an electric bike.
Approx. 40 KPH top speed
Provides you with a whole wheel with tire, not just the tire frame
Takes less than an hour to install
Feature:
1. The kit includes motorized wheel, motor controller, battery charger, thumb throttle, power break lever, wire harness
2. Quiet and reliable brushless gearless hub motor
3. Motor specifications: 36V / 800W / 350RPM
4. High motor efficiency: 75%
5. Motor diameter: 245mm
6. Drive system has no moving chains or gears, no friction, more efficient, less chance to break!
7. Brake shuts off motor automatically, saves energy, improves safety!
8. Thumb throttle with 3 LEDs indicator lights
9. Battery charger for charging lead-acid battery
10. Durable 600D Oxford cloth carrying bag along with a zippered main compartment for battery
11.We have FRONT wheel kit and REAR wheel kit in store
Package Content:
--Powerful 36V 800W brushless hub motor
--26" front wheel (the whole wheel with tire!)
--Battery charger
--Electric controller
--Thumb throttle
-- Horn button
--2ea. handlebar grips
--2 brake pullers
--Battery carrying bag
--Rubber connecting harness(color will pick at random)
--Battery not included
Special: Comes with end bracket for FREE
Battery Recommendation:
1. Electrokinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 36V, nominal capacity 20Ah is compatible with the motor.
2. Li battery is highly recommended, among which LiMn2O4 battery will be of optimum performance

ARC-22 AR Conversion Kit

ARC-22 AR Conversion Kit Review

ARC-22 Conversion KitConvert from .223 5.56mm to .22LR in just 30 secondsIncludes 3-25 round .22LR magazineManufacturer No: 10207Bar Code: 852005002073Manufacturer : CMMG, IncManufacturer Site: cmmgincShipping Dimensions: Weight: 2.25 Dimensional Weight: 8.375 (W) X2 (H) X11 (D)

Troy Barbell TROY TOSK Olympic Conversion Kit, Sold Individually

Troy Barbell TROY TOSK Olympic Conversion Kit, Sold Individually Review

Product Dimensions:
Product/Shipping Weight : 5 lbs.

Product Options:
Available In : No Options Apply

Product Description:
Olympic 2" chrome sleeve designed to fit over all 1" shafts. This attractive designed attachment turns a standard 1" bar into a 2" Olympic bar. For the user that wants to upgrade to 2" Olympic plates without changing current 1" bars. Also can be used on weight machines.

ProductLineInfo:
Troy barbell is committed to furnishing commercial facilities with a variety of premium free-weight solutions. Troy delivers quality, durability and value that will satisfy the most demanding client.

NOTE: picture shown here is just for reference.